MASABA | N/A - 2014 SN - 129074

Return to Search

  • Category:
  • Make:
  • Model:
  • Model Year:
  • Hours/Mileage:
  • Price:
  • Serial Number:
  • SCREENS
  • MASABA
  • N/A
  • 2014
  • 10
  • $620,000
  • 129074
  • Call: 888.561.1115
  •  
  •  


Condition

New

Very Good

Good

Fair

Poor

Covers

DOOR AND COVER ON HYDRAULIC TANK ARE BROKEN. COVER FOR LOWER PULLEY RUBBED THROUGH.

Engine Compartment

Paint

PAINT HAS CUTS,SCUFFS AND RUST

Decal Appearance

DECALS ARE LEDGIBLE.

Yes

Cleaning Required

Oil Level

PONY MOTOR OIL IS OVER FULL. OIL SMELLS LIKE GAS.

Starter

BATTERY IS DEAD.

Air Filter

AIR FILTER NEEDS CLEANED

No

Leaks?

Start / Stop System

ALL BUTTONS AND SWITCHES EXCEPT LOWER CONVEYOR SWITCH MOVE FREELY. ALL LABELING IS LEGIBLE. UNABLE TO TEST DURING INSPECTION.

Wiring

WIRING SHOWS NO DAMAGE. UNABLE TO TEST DURING INSPECTION.

Motion Alarm

UNABLE TO CHECK START ALARM DURING INSPECTION.

Gauges

GAUGES SHOW NO DAMAGE .UNABLE TO TEST DURING INSPECTION.

No

Error Codes

UNABLE TO CHECK FOR ERROR CODES DURING INSPECTION

Feed Hopper

HOPPER IS IN GOOD CONDITION. HOPPER PLATE IS RUBBED THROUGH.

Hopper Wings

HOPPER WINGS ARE IN GOOD CONDITION,

Shaker Mounting

SPRINGS HAVE NO LOOSE HARDWARE. UNABLE TO TEST DURING INSPECTION

Shaker Gear Box

GEAR BOX HAS NO LEAKS. FLUID LEVEL WAS FULL IN SIGHT GLASS.

Side Plates

MISSING ADJUSTER BOLTS ON BOTH SIDES OF SHAKER BOX.

Notes

UNABLE TO TEST OPERATION OF SHAKER BOX DURING INSPECTION.

Pump

PUMP SHOWS NO DAMAGE. NO LEAKS FOUND DURING INSPECTION TO TEST DURING INSPECTION.

Oil Levels

OIL LEVEL WAS FULL ON BOTH TANKS. FOUND THAT ACCESS DOOR ON LEFT SIDE TANK OF UNIT WAS OPEN. OIL COULD BE CONTAMINATED . WOULD HAVE TO FLUSH TANK AND CHANGE FILTER.

Filter

OIL COULD BE CONTAMINATED WOULD HAVE TO CHANGE FILTER

Tilt Cylinder

Controls

CONTROLS SHOW NO DAMAGE OR LEAKS. UNABLE TO TEST DURING INSPECTION.

Motor

MOTOR SHOWS NO DAMAGE.UNABLE TO TEST DURING INSPECTION.

Conveyor Cylinders

NO LEAKS FOUND DURING INSPECTION. ALL HARDWARE IS TIGHT. UNABLE TO TEST DURING INSPECTION.

No

Oil Leaks?

Feed Conveyor Frame/Bed

Feed Conveyor Pulleys

Lift Conveyor Belt

Main Conveyor Pulleys

LOWER PULLEY IS BENT,TWISTED AND RIPPED. MISSING BEARING FOR PULLEY. MISSING PILLOW BLOCK.

Main Conveyor Frame/Bed

FOUND NO APPARENT CRACKS IN FRAME.

Feed Conveyor Rollers

Lift Conveyor Frame/Bed

Main Conveyor Belt

BELT IS BROKEN.

Feed Conveyor Belt

BELT HAS CUT IN CENTER AND ROCK STUCK IN BELT.

Lift Conveyor Rollers

ROLLERS ARE MISSING. ROLLER FRAME IS BENT.MISSING SECTION ON RUBBER SUPPORT ROLLER

Main Conveyor Rollers

ROLLER BROKE FREE FROM ATTACHMENT POINT.

2 Side Conveyor Frame/Bed

2 Side Conveyor Belt

1 Side Conveyor Rollers

TWO CENTER ROLLERS HAVE DAMAGE.

1 Side Conveyor Frame/Bed

1 Side Conveyor Pulleys

Lift Conveyor Pulleys

PULLEY GEAR BOX SEEPING FROM BREATHER.

1 Side Conveyor Belt

BELT HAS MULTIPLE REPAIRS.

2 Side Conveyor Rollers

2 Side Conveyor Pulleys

Yes

Cracks

TAG AXLE GUARD IS BENT AND HAS A CRACK IN WELD.CROSS SUPPORT BENT AND TWISTED. GUARD FOR LOWER PULLEY BENT AND TWISTED.

* First Name:
* Last Name:
* Email:
* Phone:
* When to call:
Comments:






* Required

* Recipient Email:
Your Name:
Comments:



* Required