Steps / Ladder
Right strap for step missing.
Some bent missing hardware.
Radiator Grill & Shroud
Missing fan screens & blades have minor chunks on tips.
Grab iron on fuel tank bent in. Grab iron on hydraulic tank missing.
Crankcase Guard / Battery Box
Eng. Enclose Hood / Stack
Main Frame Welds
Glass / Mirrors
NORMAL SCRATCHES FOR AGE / HOURS
ROPS or Non-ROPS
SEAT IS WORN
Safety Decals Legible
Safety Decals In Place
Seat Cushion / Arm Rest
torn and cracked. Left arm rest shock bad.
missing vents/broken vents. Rear vent panel broken and missing hardware.
Left door shock bad.
scratches. Left and right window frame damage only thing holding it in is the screen.
inop. Compressor locked up and belt missing.
EMS Panel / Warnings
missing control knob
Back Up Alarm
Fuel Injection System
Belts / Pulleys
Oil Filter Condition (CUT)
Turbocharger / Blower
cover is missing latch and damaged.
Exhaust / Muffler
Fluid Levels OK?
Compression in Radiator
Water in Oil
Oil Pressure (H/L/N)
ENGINE HAS BEEN FRESHLY SERVICED AND HYDRAULIC FILTERS CHANGED - ORIGINAL ENGINE REPLACED
Blades have pieces missing on the end.
Lights missing along with cover lens
Batteries / Cables
Transmission - Forward
Has dents & missing iron
Pumps & Valves
Has leakage around pumps
Right steering cylinder has leakage.
Main hydraulic control valve leaks. There are also leaks around the hydraulic pumps and under cab.
Both rod end pins on steering cylinders have excessive wear. Steering stop pads missing and bolts broken. Frame cracked at same location.
Tires are 28L-26. Fronts are Firestone and approx 60%. Rears have aprox 10% and have chunks and pancakes.
Hydraulic High and low speed inop. Broken bolts in cab lock down pins.
Cab bushings badly worn. Pillow block bearing bad. Saw tach not hooked up and hose to short. All pins on head and front end of machine have excessive wear.
Saw head is SH50 sn: A15373 Missing one panel and deep cups worn in disc.
Copyright © 2018 Ironmart, A Division of Blanchard Machinery Company. All Rights Reserved.